Piotr Posted April 28, 2016 Report Share Posted April 28, 2016 OK. Orders: Qadir continues same course and speed (256@30 knots) Falaq change course to 270 and maintain speed 30 knots. Continue for 30 minutes unless get new ESM contacts or helo comes inside 10 nm range of any of the ships. After 30 minutes, switch on radar on Qadir. Depending on radar contacts, I'll give you new orders. I'm planning a bit ahead, but assuming a squared flying pattern for the helo leads me to the center of the square... Quote Link to comment Share on other sites More sharing options...
kmart494 Posted April 29, 2016 Author Report Share Posted April 29, 2016 Turn 1059 - Plotting Phase: The ESM cross bearings are within 10 nm of Qadir. It appears there was a course change for the unknown unit. I cleaned up some of the ref points, but left the ones that show the starting location of contact and places where the bearings indicated a course change. You have C-802 range circles. turn_1059_red.txt turn_1059_red_intl.txt Quote Link to comment Share on other sites More sharing options...
Piotr Posted April 30, 2016 Report Share Posted April 30, 2016 Sorry for the delay. My orders: Qadir new course 290 at 30 knots. Switch radar on. Falaq new course 250 at 30 knots. If new contacts appear on radar, will evaluate and give new orders. Quote Link to comment Share on other sites More sharing options...
kmart494 Posted April 30, 2016 Author Report Share Posted April 30, 2016 Turn 1106 - Plotting Phase: At 1103 Qadir watched the ESM contact come to within 2.5 nm of the ship (but outside of gun range). The crew could only see a speck in the air due to haze. It moved off to the South. At 1105.5 Falaq spotted a speck in the sky but was too far for guns. It appears to be the same ESM contact. It is presently moving off to the West. I have given you range circles for detecting Large and Medium surface contacts around Qadir. Do you wish to change any orders? Edit: I had to reload the turn files due to an unsaved change. turn_1106_red.txt turn_1106_red_intl.txt Quote Link to comment Share on other sites More sharing options...
Piotr Posted May 1, 2016 Report Share Posted May 1, 2016 Orders: Qadir maintaing course 290 at 30 knots, radar on. Falaq change course to 270 at 30 knots, radar off. Maintain until radar contact detected or ESM contact again closes distance to us. Anyway, will reevaluate for new orders in 30 minutes. Thanks for range circles for weapons and detection. You are ahead of my requests... BTW, are you using Harpoon 4 original radar ranges or modified ranges per "Smartes radars for Harpoon" rules? Quote Link to comment Share on other sites More sharing options...
kmart494 Posted May 1, 2016 Author Report Share Posted May 1, 2016 I am using the Smarter Radars Rules. Turn 1133 - Plotting Phase: You have new ESM contacts. The suspected helo contact is "hanging around" but remains well outside gun range. turn_1133_red.txt turn_1133_red_intl.txt Quote Link to comment Share on other sites More sharing options...
Piotr Posted May 1, 2016 Report Share Posted May 1, 2016 Orders: Qadir, new course 180 at 30 knots, switch radar off Falak, new course 220 at 30 knots, radar off Continue until get a cross-bearing ESM for new contacts, any of them. Quote Link to comment Share on other sites More sharing options...
kmart494 Posted May 1, 2016 Author Report Share Posted May 1, 2016 Turn 1142 - Plotting Phase: You have a cross bearing on the International Radar set. Since so many civilian vessels use it, I am using the "Unknown" color for the ESM bearing. Do you wish to reclassify this contact? turn_1142_red.txt turn_1142_red_intl.txt Quote Link to comment Share on other sites More sharing options...
Piotr Posted May 2, 2016 Report Share Posted May 2, 2016 Next to a military radar, must be an enemy... Classify this contact as hostile. Orders: Qadir, new course 225 at 30 knots Falak, new course 235 at 30 knots Continue for 30 minutes or until get an ESM cross-bearing for contact with radar 1007. Question about missiles (I have my rules a bit rusty): Guidance I/TARH (the Inertial part) means that I don't need a radar return to launch? Could I launch with only an ESM cross-bearing? Quote Link to comment Share on other sites More sharing options...
kmart494 Posted May 3, 2016 Author Report Share Posted May 3, 2016 Turn 1148 - Plotting Phase: You have an ESM cross bearing on Radar 1007. The I/TARH missile needs a bearing for launch and a distance at which the seeker will turn on. You can launch it without any information at all. But, you won't hit anything unless you know where the missile should go to start looking on its own. turn_1148_red.txt turn_1148_red_intl.txt Quote Link to comment Share on other sites More sharing options...
Piotr Posted May 3, 2016 Report Share Posted May 3, 2016 OK. My doubt was if I needed a radar return for launch, or just a position (bearing, distance) to turn on the seeker. So, I could launch based only in ESM cross-bearings, correct? Quote Link to comment Share on other sites More sharing options...
Piotr Posted May 3, 2016 Report Share Posted May 3, 2016 New orders: Qadir, new course 230 at 30 knots Falaq, maintain course 235 at 30 knots Continue for 30 minutes unless contact Radar 1007 comes closer than Intl Radar, or Helo contact comes inside gun range. Quote Link to comment Share on other sites More sharing options...
kmart494 Posted May 4, 2016 Author Report Share Posted May 4, 2016 Turn 1212 - Plotting Phase: The ESM bearings for Radar 1007 indicate a possible course change. Yes, you can launch based on ESM bearings. turn_1212_red.txt turn_1212_red_intl.txt Quote Link to comment Share on other sites More sharing options...
Piotr Posted May 4, 2016 Report Share Posted May 4, 2016 OK, I'll make my attack and run. Qadir: Course 230 at 30 knots for 2 TTurns (6 min) Fire all four C802 on bearing 238, activate seeker after 10 nm After firing, turn to 315 at max speed 34 knots, switch radar on Falaq: Course 235 at 30 knots for 2 TTurns (6 min) Fire all four C80s on bearing 293, activate seeker after 10 nm After firing, turn to 190 at max speed 34 knots, switch radar on I'm not sure, but I suppose cannon can be Radar controlled. But my Type 756 radar is listed as SS only. Can it engage air targets? Anyway, then see what happens Quote Link to comment Share on other sites More sharing options...
kmart494 Posted May 5, 2016 Author Report Share Posted May 5, 2016 Turn 1215 - Planned Fire Phase: Both Houdongs fire all their C802s, which are at VLow altitude upon launch. Turn 1215 - Detection Phase: Halifax picks up unknown air targets at the exact location of the Houdongs. They are classified as hostile. Turn 1215 - Reaction Fire Phase: Halifax launches 2x RIM-7M SAMs (one at each group). *Switch to Engagement Turns* Turn 1218.0 - First Movement Phase: The SAMs reach their targets and destroy 1x C802 in each group. Because the STIR directors engaged the targets this turn, they are busy for the entire turn. Turn 1218.5 - Second Movement Phase: Two more SAMs fired in the First Fire Phase reach and destroy 2 more C802s. Turn 1219.0 - First Fire Phase: Halifax takes out 1 C802 with the Phalanx. Turn 1219.0 - Second Air Attack Resolution: The remaining C802s hit their targets (one on Halifax and two on the tanker). Halifax - 33 damage points, no critical hits, and no speed loss. Tanker - 66 damage points, 3 critical hits (engineering, minor flooding, bridge), new max speed 10 kts. Tomorrow - the response! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.