Defect Name: Sub ignores patrol zone

Build: HCE 2007.000

Repeatable: Y

Operating System: XP

DB used: HCDB-070524

Scenario used: Sub ignores patrol zone.sc1

Long Description: Sub ignores assigned formation patrol zone. This problem was first identified by Mark Kratzer.

 

Sequence to reproduce:

1. Start Sub ignores patrol zone.SC1 in GIUK battleset from USSR side

2. Select sub group ZPU

3. Order sub group to detach the SSGN Echo from the group and only leave the Victor within the group

4. Run compression at high speed

5. You can see that the Victor has been assigned to the SE quadrant, but it never goes there.

6. The sub runs at 19kts to some imaginary point to the SW. The group icon and the unit icon do not match and get further and further away from one another.

7. Select the Victor in the Unit display window and enable the "Lock" box and watch as the unit display pulls away from the group icon.

 

Expected behaviour: Unit should move to assigned formation patrol zone.

Observed behaviour: Unit does not move to assigned formation patrol zone.

Sub_ignores_patrol_zone.zip

Moved to Mantis #2425.

Confirmed in 2008.002.

Related to 0002401?: Ships not moving to appropriate patrol zones when selected in formation editor.

Related to 0002426?: Patrol zones do not match positions.